1/24 Fujimi Mclaren F1 GTR Upgrade kit instructions

 

1. Cut the fins off on the studs on the front and rear suspension assembly highlighted in red.

2. Use file to clean smooth.

3.Use Super glue and attach the front suspension spacer under the front suspension assemble. make sure the arrow is pointing forward on the resin spacer block.

4. Glue on and hold as flat as possible

5. Superglue the suspension assembly with resin spacer block to front floor pan. Be sure to glue on level.

 

Rear suspension 

1. Rear suspension spacers Two Large and one small

Rear lower wishbone spacer

 

Share this post...

Previous post